Subaru Ascent Forum banner

RAB issue!

13K views 7 replies 6 participants last post by  Robert.Mauro 
Don't know, but is it possible if the camera lens is dirty/has a spot on it? Just a WAG.
RAB displays zones on the reverse camera but doesnโ€™t operate based on the camera view; it uses the sensors in the rear bumper.
sounds like something the dealer may have to look at unless you want to remove your rear bumper cover and check the sensors for any blatant misalignment. I had a sensor bent slightly downward a while back by someone who brushed my rear bumper. I got the RAB disabled warning in my case.
 
  • Like
Reactions: packout
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top