Subaru Ascent Forum banner
1 - 3 of 3 Posts

·
Registered
2020 Ascent Limited
Joined
·
3 Posts
Discussion Starter · #1 ·
Hi guys!

first post here, this afternoon I was filling up the washer reservoir on my car and the foil from the seal broke lose and went down into the reservoir.

do any of y'all have any tips on how to get the foil out other than taking it in to get flushed out?

thanks in advance for the tips and advice!
 

·
Registered
2020 Ascent Limited
Joined
·
3 Posts
Discussion Starter · #5 ·
If your reservoir is like mine, the fill neck is fairly lengthy and I'm not sure you could see or retrieve the foil based on being able to see it. Short of taking one of the flexible "grab it" type tools you can buy at any auto parts store and go blindly fishing for it, I'd recommend just letting it be and see if it ever becomes an issue, as it may not.
thats what ive been reading, im looking at at least a 36" claw. not trying to break the bank, just frustrated that it happened. first time the foil just falls away like that on me.
 
1 - 3 of 3 Posts
Top