Subaru Ascent Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Installed a Curt brake controller using their optional pig-tail wiring harness. Plug the Subaru-provided harness into the plug under the dash, use crimp connectors on both ends of pig-tails. Set sensitivity on controller and go traveling! Weighed our Rpod 179 on CAT scales at local truck stop and everything is well within specs.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top