Subaru Ascent Forum banner
1 - 1 of 1 Posts

20 Posts
Discussion Starter · #1 ·
Apologies in advance for not getting any gritty wiring as it took me some tinkering to get it to work.

Just tested and reused my blend mount setup from my Legacy which to no surprise works with the mirror mount. This just bolts on with the hex screws clamping onto the mount, saving you from any suction cups on the windshield. I then tapped into the wiring on the smart rear view mirror (Touring), just going with my previous setup and going red to red and black and black similar to the images on this page. Hope that helps any of you looking at similar setups and avoids doing a run to the fuse box, especially if you're doing a dash cam setup as well.

Here are a few shots for your reference.

1 - 1 of 1 Posts