Subaru Ascent Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
62 Posts
Discussion Starter · #1 · (Edited)
Normally the center pin is supposed to be back up light power, but not so with my Touring. Am I missing anything with the way Subaru wires their connectors? The car's regular back up lights work. Problem is my surge brakes need 12v to unlock while backing up. Does anyone else have surge brakes with a relief solenoid that's working or could someone check their connector for 12v at the center pin. There are 2 fuses for the back up lights and both are good. Thanks
 

·
Administrator
Joined
·
10,943 Posts
3 hours at the dealer this AM, tech found a bent terminal. "Bad install" was his explanation.
Glad it's resolved.
 
1 - 3 of 3 Posts
Top