Subaru Ascent Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Disappointed to have to introduce myself to this community this way but here we go.

Purchased a 2020 Ascent Premium this Saturday (8/15/20). Next day 20 mins of city driving the AT temp light starts blinking followed by the rest of the ES and RAB warning lights, no squealing or slipping and we were home in 5 mins. Monday same issue also around 20mins of engine time. appointment Wednesday, dropped off at the dealer with 126 miles on the Odometer (do i win for fastest turn around?) Thursday/ today, picked up from dealer with the following repairs

"127 Found DTC P0719 brake lamp switch B circuit low inspected, Tested found DTC P0719 brake lamp switch B circuit low, check fuse No.37. Check Harness (B54) No. 29 ? (B65) No. 2: (B65) and No.1 ? fuse (No.37): Check input signal for TCM, found voltage less than 10 volts, REPLACED Brake lamp switch, Adjusted spec, check engine light is gone at this time. " Part# 83311AL00A

20 mins into driving home the AT temp light starts blinking followed by the rest of the ES and RAB warning lights, no squealing or slipping. Appointment to drop it off tomorrow, friday to complete our first week of ownership.

Ps: have read as much as i can on this forum regarding the 2019 transmission issues, incl the wire harness issues, mostly at around 2K-12K miles with squealing and high rpm revs, which i in my 60 miles of driving have not experienced. since this is a 2020 model just putting this out there, will keep updating.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top